Skip to content
Skip to content

Crawl Space Vapor Barrier

Vapor Barrier Installation for Bay Area Crawl Spaces

Bare dirt under a house gives off moisture all year, and a torn plastic sheet doesn't do much better. That damp air soaks into the floor framing, feeds mildew, and draws rodents. Our in-house crew replaces old or missing ground cover across the East Bay and Peninsula with a heavy-duty vapor barrier, sealed at every seam and run up the foundation walls. When a crawl space needs more than a new liner, the vapor barrier becomes the first step of full crawl space encapsulation.
Free Inspection
Same-Day Estimates
In-House Crew
No Subcontractors
What Homeowners Experience

Signs Your Crawl Space Needs a New Vapor Barrier

Most homeowners never go under the house, so the first clue usually shows up somewhere else. Here's what tends to send people our way:
Two Rywen crew members laying a new vapor barrier across a Bay Area crawl space floor
The Rywen Approach

A Vapor Barrier Only Works When the Ground Under It Is Ready

Plastic thrown over wet, uneven dirt won't hold up. We check drainage, ventilation, and whatever's already down there before a new liner goes in, so the barrier keeps ground moisture out for years instead of months. If the space has droppings or old debris, our attic and crawl space cleaning comes first.
Rywen technician sealing a crawl space vapor barrier to the foundation wall
How It Works

How We Install a Crawl Space Vapor Barrier

step 1

Free Crawl Space Inspection

We go under the house, measure moisture, check the old liner and the vents, and photograph everything. You'll see exactly what we saw, and the written report is free.

step 2

Written Estimate

Same-day pricing that outlines the scope of work, liner specification, and any drainage or ventilation items that need to be addressed before or during installation.

step 3

Removal and Prep

We remove old liner, contaminated material, and debris. We grade and prepare the ground surface before the new vapor barrier goes in.

step 4

Liner Installation

Our crew rolls the new vapor barrier across the whole floor, runs it up the foundation walls, and seals every seam and pipe penetration.

step 5

Verification and Warranty

Tony returns approximately one week after installation to inspect conditions and confirm the moisture levels have improved. The warranty is issued after this confirmation visit.
Common Questions

Crawl Space Vapor Barrier Questions We Hear Most

What thickness vapor barrier do I need?
For most Bay Area crawl spaces, 10 mil does the job. If people crawl through the space often, or the ground stays damp, 15 or 20 mil holds up better against punctures. We'll recommend a thickness after we've seen the space.
It depends on what we find. If the space is fairly dry and the real problem is a missing or worn-out ground cover, a new sealed vapor barrier is often enough. Standing water, heavy moisture, or a ventilation problem calls for full crawl space encapsulation. Either way, we'll tell you which one your home needs after the free inspection, and we won't sell you the bigger job if the smaller one fixes it.
Yes. A thick liner gives every contractor who works under your house later, from a plumber to an HVAC tech, a clean surface to crawl on instead of dirt. Their work goes faster, and they don't track mud back through your home.
Yes, but we seal the entry points and clear out droppings and nesting material first. Otherwise the new liner just becomes the next thing they chew. Rodent proofing and crawl space cleaning are separate services, and most homeowners book them together with the vapor barrier.
A quality liner that's installed right and isn't torn up by later work typically lasts 20 years or more. Our follow-up inspection confirms the installation is sound before we issue the warranty.